1996 Buick Century

No photo available — body style shown for reference.

The Verdict

Worst problem area

Brakes

Brakes leads by volume: 13 of 80 complaints (16%) mention it. Complaints mentioning Airbags & Restraints include more reported injuries (6) than those mentioning any other identified area.

Complaints filed fell from 99 in 1995 to 80 in 1996.

Data last changed . Sources: NHTSA complaints and recalls, EPA fuel economy data. Methodology

Advertisement

Cost, Fuel Economy & Complaint History

Fuel cost, fuel economy, and complaint history by model-yearScroll sideways to see all 3 years. Fuel figures show the range across trims for years with more than one EPA-rated configuration.
Category199519961998vs. 1996 Midsize Cars
Annual fuel cost ($)3,1002,600–2,9502,950
Combined MPG2021–2421
City / Highway MPG17 / 2618–21 / 26–2917 / 27
CO₂ tailpipe (g/mi)444370–423423
Complaints filed9980218Not compared
Recalls issued124Not compared
Crash-involved complaints1069Not compared
Fire-involved complaints110Not compared
Injuries reported1479Not compared
Deaths reported000Not compared
Configurations compared221

Not compared: this database has no vehicle sales or registration figures, so a raw count mostly reflects how many were sold, not how safe the vehicle is.

Common questions

How many recalls does the 1996 Buick Century have?

2 NHTSA recall campaigns as of Sep 16, 2026. Check your VIN with NHTSA to see whether one applies to your car.

What is the most common complaint about the 1996 Buick Century?

Brakes: 13 of 80 NHTSA complaints (16%) mention it.

What gas mileage does the 1996 Buick Century get?

EPA rates it 21–24 MPG combined across 2 configurations.

How much does it cost to fuel a 1996 Buick Century?

EPA estimates $2,600–$2,950 a year in fuel costs, using EPA's assumptions.

EPA-Rated Configurations (2)

Every EPA-rated configuration on this page, one row each.A number tagged (low) or (high) is this page’s own cost-table figure of that name, above.
ConfigurationTransmissionCylindersDisplacementDrivetrainFuel TypeVehicle ClassCityHighwayCombinedAnnual Fuel CostCO₂
Configuration 1Automatic 3-spd42.2LFront-Wheel DriveRegularMidsize Cars21 mpg (high)29 mpg (high)24 mpg (high)$2,600 (low)370 g/mi (low)
Configuration 2Automatic 4-spd63.1LFront-Wheel DriveRegularMidsize Cars18 mpg (low)26 mpg (low)21 mpg (low)$2,950 (high)423 g/mi (high)

Complaints by Category

Complaints by category, in the same fixed order on every page
CategoryComplaintsCrash-InvolvedFire-InvolvedInjuriesDeaths
Engine90100
Transmission & Drivetrain70000
Fuel System110000
Electrical80000
Brakes132020
Steering101000
Suspension, Wheels & Tires70000
Airbags & Restraints73060
Driver Assistance & Speed Control80000
Body, Seats & Latches101000
Visibility & Lighting90000
Other30010

A complaint that names more than one category is counted in each, so the rows can add up to more than the total number of complaints.

Recalls (2)

  • FUEL SYSTEM, OTHER:STORAGE:TANK ASSEMBLY:PRESSURE RELIEF DEVICES · Campaign 07E021000 · Mar 12, 2007

    Defect: CERTAIN DELPHI FUEL PRESSURE REGULATORS, P/NOS. FP10020-11B1, FP10026-11B1, AND FP10027-11B1, SOLD AFTER JANUARY 9, 2007, AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE UNIVERSAL PRESSURE REGULATORS (UPR) WERE PRODUCED WITHOUT AN O'RING AND RETAINER.

    Consequence: FUEL MAY LEAK, POSSIBLY RESULTING IN A FIRE.

    Remedy: DELPHI WILL NOTIFY OWNERS AND REPLACE THE UPR FREE OF CHARGE. THE RECALL BEGAN ON APRIL 23, 2007. OWNERS CAN CONTACT DELPHI AT 877-411-8770.

  • SEAT BELTS:FRONT:ANCHORAGE · Campaign 95V173000 · Sep 12, 1995

    Defect: THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, "SEAT BELT ASSEMBLY ANCHORAGES."

    Consequence: CONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.

    Remedy: DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.